Last updated: November 7, 2026
Reviewed by a certified public accountant (CPA) on November 10, 2026.
EBITDA stands for earnings before interest, taxes, depreciation and amortization: net income with four expenses added back in. It shows what a business earns from its operations before financing decisions, tax rules and accounting for long-lived assets come into play, which is why lenders, buyers and investors cite it all the time.
Short answer: EBITDA is net income plus interest, taxes, depreciation and amortization. A company with $450,000 of net income, $150,000 of interest, $150,000 of tax and $350,000 of depreciation and amortization has EBITDA of $1.1 million. It’s handy for comparing operating performance, but it isn’t cash flow and it isn’t a GAAP measure.
Key takeaways
- According to the SEC, the “earnings” in EBITDA refers to net income as reported under GAAP, and public companies have to reconcile EBITDA to net income rather than operating income.
- Any version calculated another way, with extra add-backs, should go by a different name, like adjusted EBITDA.
- EBITDA margin is EBITDA divided by revenue; in our worked example, it comes to 13.75%.
- For tax years beginning after December 31, 2024, the federal business interest limit under Section 163(j) is once again based on an EBITDA-style income measure, according to the IRS.
- EBITDA leaves out capital spending and working capital, so a business can post strong EBITDA and still run short of cash.
Table of Contents
What the acronym means
Every letter takes one cost out of the profit picture:
- Earnings: net income, the bottom line on the income statement.
- Before interest: interest reflects how the company is financed, not how well it runs.
- Before taxes: tax bills differ by entity type, state and credits.
- Depreciation: the cost of physical assets like equipment and buildings, spread across their useful lives.
- Amortization: the same concept for intangible assets, like acquired customer lists or software.
Take those out and you get a rough picture of operating earnings that’s easier to compare across companies with different debt loads, tax positions and asset ages. That comparability is the entire point, and it’s also where most of the problems come from, as you’ll see below.

EBITDA formula: two ways to calculate it
There are two standard routes, and they should arrive at the same figure when a company has no unusual non-operating items.
Top-down, starting from net income:
EBITDA = Net income + Interest expense + Income tax expense + Depreciation + Amortization
Bottom-up, starting from operating income:
EBITDA = Operating income (EBIT) + Depreciation + Amortization
Regulators favor the top-down version. In its compliance and disclosure interpretations, reproduced by PwC Viewpoint, the SEC staff says “earnings” means net income as presented under GAAP. When a public company presents EBITDA as a performance measure, the staff expects a reconciliation to net income instead of operating income, since the metric adjusts for items operating income doesn’t exclude.
The two methods diverge when a company has gains or losses below operating income, like investment income or a loss on selling equipment. The top-down figure includes those items, and the bottom-up figure excludes them. Choose one, label it and stay consistent.
Worked example: a small distributor
Below is a simplified income statement for a fictional regional HVAC parts distributor. The numbers are illustrative and don’t come from a real company.
| Line item | Amount |
|---|---|
| Revenue | $8,000,000 |
| Cost of goods sold | ($5,200,000) |
| Gross profit | $2,800,000 |
| Operating expenses, excluding depreciation and amortization | ($1,700,000) |
| Depreciation | ($300,000) |
| Amortization | ($50,000) |
| Operating income (EBIT) | $750,000 |
| Interest expense | ($150,000) |
| Income before tax | $600,000 |
| Income tax expense | ($150,000) |
| Net income | $450,000 |
Top-down: $450,000 + $150,000 interest + $150,000 tax + $300,000 depreciation + $50,000 amortization = $1,100,000.
Bottom-up: $750,000 operating income + $350,000 depreciation and amortization = $1,100,000.
The two methods match because this company has no non-operating gains or losses.
EBITDA margin
EBITDA margin shows how much of every revenue dollar remains before those four costs:
EBITDA margin = EBITDA / Revenue
For the distributor, $1,100,000 / $8,000,000 = 13.75%. Put another way, roughly 14 cents of each sales dollar remains after product costs and operating overhead, before interest, taxes and asset costs.
Margins only tell you something when set against a benchmark: the same company a year earlier, a budget or close competitors. A software company and a grocery chain have entirely different margin structures, so comparing them reveals very little.

How it compares with EBIT, net income and cash flow
| Measure | What it adds back or removes | Best for | Main blind spot |
|---|---|---|---|
| Net income | Nothing; the GAAP bottom line | Overall profitability, taxes, dividends | Mixes operations with financing and tax |
| EBIT (operating income) | Removes interest and taxes | Comparing operations while still charging for asset use | Ignores capital structure only |
| EBITDA | Removes interest, taxes, depreciation and amortization | Comparing operating performance across companies; debt covenants; valuation shortcuts | Ignores capital spending, working capital and asset wear |
| Operating cash flow | Starts from net income, adjusts for non-cash items and working capital | Judging real cash generation | Lumpy; timing of collections and payments can swing it |
If you keep just one line from this table, make it this one: EBITDA is a profit measure with certain costs removed, not a measure of cash.
Adjusted EBITDA: add-backs and the SEC’s rules
Adjusted EBITDA begins with the standard figure and adds back items management sees as unusual or non-cash. Typical add-backs include:
- Stock-based compensation
- One-time legal settlements or restructuring costs
- Transaction costs tied to an acquisition
- In private company sales, owner pay above a market salary
Return to the distributor. If it paid an $80,000 one-time legal settlement and booked $40,000 of stock-based compensation, adjusted EBITDA would be $1,220,000, and the adjusted margin would climb to 15.25%.
For public companies, the SEC staff draws a firm line: a measure calculated differently shouldn’t use the plain name. It needs a title of its own, like adjusted EBITDA, and doesn’t get the same treatment as the standard version. The staff also says it shouldn’t be shown on a per-share basis.
Private companies aren’t subject to those rules, which is precisely why buyers and lenders go through add-backs line by line. A “one-time” cost that appears every year isn’t one-time.
Where the number actually gets used
Valuation
Buyers often value companies as a multiple of this figure, using enterprise value divided by EBITDA. The attraction is obvious: it compares businesses before differences in debt and tax. The danger is just as obvious: two companies with the same earnings on this basis can need very different amounts of new equipment each year.
Loan covenants
Lenders often limit leverage as total debt divided by EBITDA. The distributor in our example, carrying $3.3 million of debt, would come in at 3.0 times. Covenant definitions usually specify exactly which add-backs count, so read the credit agreement instead of assuming it matches your management reports.
The federal business interest limit
The metric matters for taxes too. Under Section 163(j), deductible business interest generally can’t exceed business interest income, plus 30% of adjusted taxable income, plus floor plan financing interest. The IRS says the One, Big, Beautiful Bill Act brought back the add-back for depreciation, amortization and depletion in calculating adjusted taxable income for tax years beginning after December 31, 2024. From 2022 through 2024, those amounts couldn’t be added back, which tightened the limit for capital-heavy businesses.
Smaller companies may not be touched at all. The IRS sets a gross receipts test of $31 million for 2025 and $32 million for 2026 for the small business exemption, based on average annual gross receipts over the prior three years. At $8 million, our distributor would generally fall below it.
When the number misleads
The metric is useful, but it conceals costs that are entirely real:
- Capital spending. Depreciation is an accounting estimate, but the trucks, machines and servers behind it have to be replaced with actual cash. If the distributor spends $900,000 a year on equipment, its $1.1 million of EBITDA shrinks to just $200,000 before interest, taxes and working capital.
- Working capital. Rapid growth often locks up cash in inventory and receivables, and EBITDA doesn’t capture any of it.
- Lease accounting. Under IFRS 16, operating lease costs shift into depreciation and interest, so the metric goes up. Under U.S. GAAP (ASC 842), operating lease costs remain in a single operating expense line, so there’s no such boost. Law firm Jones Day highlighted this gap for cross-border deals. Comparing a U.S. company’s figure with an IFRS reporter’s without adjusting exaggerates the difference.
- Aggressive add-backs. Every “one-time” item folded into adjusted EBITDA makes the business look more profitable than its income statement shows.
SDE: the small-business alternative
When a very small business changes hands, brokers often rely on seller’s discretionary earnings (SDE) instead. SDE begins from the same figure and also adds back one owner’s total compensation and discretionary perks, since the buyer will usually step into the owner’s role. The standard measure becomes the more common yardstick once a business is big enough to have a paid management team that would stay on after a sale.
If you’re getting a business ready to sell, work out both. The gap between them shows how much the company depends on its owner.
How to calculate it from your own books in 5 steps
- Begin with net income from your income statement for the period.
- Add back interest expense. Use interest on debt, not bank fees.
- Add back income tax expense. Pass-through entities that don’t pay entity-level income tax may have little or nothing to add.
- Add back depreciation and amortization. Take these from the fixed asset schedule or the cash flow statement, where they show up as non-cash adjustments.
- Compare the result with operating income plus depreciation and amortization. Any difference points to non-operating items you should be able to explain.
If you build the calculation in a spreadsheet, keep the bridge from net income visible instead of hard-coding the answer; our guide to using Claude in Excel shows one way to speed up that kind of workbook.

Reading the number in an earnings release
Public companies that report the metric usually put a reconciliation table near the end of their earnings release. Four checks take roughly five minutes:
- Locate the starting line. The bridge should start with GAAP net income. If it begins further down, at operating income, ask what got left out.
- Read each adjustment. Stock-based compensation, restructuring and acquisition costs are typical. Vague labels like “other” deserve a second look.
- Compare quarter to quarter. Adjustments that show up every period are part of the business, not exceptions to it.
- Set it beside the cash flow statement. If earnings on this basis keep rising while operating cash flow flattens, working capital or capital spending is soaking up the difference.
These checks work equally well on a private company’s management accounts or a seller’s deal deck.
A three-year view beats a single year
A single year can flatter any business. Here’s the fictional distributor with capital spending shown next to the headline figure:
| Year | Earnings before interest, taxes, D&A | Capital expenditures | Difference |
|---|---|---|---|
| Year 1 | $950,000 | $400,000 | $550,000 |
| Year 2 | $1,020,000 | $650,000 | $370,000 |
| Year 3 | $1,100,000 | $900,000 | $200,000 |
The headline figure grew each year, while the amount left after replacing equipment fell by more than half. That’s the trend a lender or buyer will spot first.
Common mistakes
- Treating it as cash flow. It excludes capital spending, working capital and debt payments.
- Mixing definitions. Setting one company’s adjusted figure against another’s standard figure.
- Skipping the reconciliation. If a figure can’t be traced back to net income, don’t depend on it.
- Comparing margins across industries. Asset-light and asset-heavy businesses have very different normal ranges.
- Overlooking the lease difference when comparing U.S. GAAP and IFRS companies.
Our Take / Expert Perspective
Our take: the real question isn’t “what’s the EBITDA?” It’s “what does it take to keep those earnings coming?” The figure tells you how well a business runs before financing and taxes. It’s silent on how much cash the business has to reinvest just to stay in place, and that’s what owners, lenders and buyers really care about.
That’s why the most useful companion figure is EBITDA minus capital expenditures. Calculate it for the past three years. If the gap between the two is wide and widening, the headline figure flatters the business. For a software company, the gap might be small; for a trucking firm or a restaurant group, it can eat up most of the earnings.
The 2025 change to Section 163(j) gives a practical reason to track the figure closely. Larger, capital-intensive borrowers that lost interest deductions from 2022 through 2024 may be able to deduct more now that depreciation and amortization are back in the calculation. Forecast, not fact: more lenders and tax advisers will likely ask for EBITDA-based schedules alongside covenant reporting in 2027.
Our recommendation: report standard EBITDA, adjusted EBITDA and EBITDA minus capital expenditures together each quarter, each one reconciled to net income. Three numbers on one page, and nobody gets caught off guard.
Frequently Asked Questions
What is a good EBITDA margin?
No universal good number exists. Margins vary a lot by industry, so compare a company with its own track record and with close peers. A figure that’s rising as revenue grows is usually a better sign than any single result.
Is EBITDA the same as operating income?
No. Operating income, also known as EBIT, comes after depreciation and amortization. EBITDA adds both back, so it’s higher than operating income for any company with depreciable or amortizable assets.
Is EBITDA a GAAP measure?
No. EBITDA isn’t defined under U.S. GAAP, which is why the SEC treats it as a non-GAAP measure. Public companies presenting it have to reconcile it to net income and give the GAAP number at least equal prominence.
What’s the difference between EBITDA and adjusted EBITDA?
The standard version adds back only interest, taxes, depreciation and amortization. Adjusted EBITDA also strips out items management considers unusual or non-cash, like stock-based compensation or one-time legal costs. Always ask to see the list of adjustments.
Can EBITDA be negative?
Yes. When operating expenses before depreciation and amortization are larger than gross profit, EBITDA is negative. That means the core operations are losing money even before asset costs, financing and taxes.
Why do lenders use EBITDA?
Lenders treat it as a rough gauge of the earnings available to service debt. Leverage covenants like debt divided by EBITDA are common, but every credit agreement defines the term its own way, so the covenant figure can differ from your internal reports.
This article is for general information only and is not tax, accounting or financial advice. Consult a licensed CPA or financial professional for your situation.
Sources
- PwC Viewpoint: SEC compliance and disclosure interpretations, Non-GAAP Financial Measures, Section 103 (EBIT and EBITDA), checked November 7, 2026
- IRS: Questions and answers about the limitation on the deduction for business interest expense, checked November 7, 2026
- Jones Day: New IFRS and U.S. GAAP lease accounting rules: impact on M&A transactions, checked November 7, 2026
- aiandblog: Claude for Excel for accountants and our Editorial Policy
Photos: Markus Winkler, Carlos Muza, Lukas Blazek and Berke Citak on Unsplash.










Leave a Reply